Testing the weather station PCB by verifying the OLED display, UART connection, and sensor modules, while uncovering an unexpected BMP280 sensor mix-up.

Finishing the weather station prototype PCB, testing the assembled board, discovering an OLED pinout mismatch, and investigating reverse voltage through the LDO regulator.

Assembling and testing a custom weather station PCB, including SMD reflow using a hotplate, lessons learned, and early-stage debugging.

Sending PCB’s to be manufactured

Tweaking my Weather Station Design and a First Pass at designing the PCB

Designing a Weather Station Prototype using KiCad and PCBWay (using an ESP32-C3 SuperMini module)